 |
| AccuDose - details |
 |
| AccuDoseTM dispensers are an economical way to dispense a wide variety of automatically diluted solutions into spray bottles, buckets or other containers at the touch of a button. Dilution is controlled by drawing chemical through metering tips of varying size and injecting this metered amount into the water flow. |
| Economical, linkable systems to meet customers’ needs |
| AccuDose dispensers use durable materials and state of the art water valve technology to provide low cost, consistent performance, and reliable service in a wide variety of customer environments. Users will also appreciate the ease of operation and low service requirements of the AccuDose line. Standard models are available with any combination of low and high flows in one, two and three product configurations. In addition, the linkable inlet and outlet fittings on AccuDose dispensers allow for more than three products to be dispensed – a larger dispensing system is created by simply joining the appropriate units together. And even after installation of the system, it can be expanded as new product needs arise. This versatility reduces stocking requirements while it increases the distributor's ability to respond to customer needs. And since each standard button can be converted to lockability in the field, customizing the standard systems to individual needs is simpler than ever! |
| A key part of any chemical management program |
AccuDose dispensers provide these benefits to any chemical management program:
Better chemical performance
- Consistently correct dilution ensures products perform as they were designed to.
Labor savings
- Employee time required to prepare solutions is greatly reduced.
- Additional labor required to make up for solutions that are too weak is eliminated, as well as re-work to restore areas damaged by solutions that were too strong.
Improved employee safety
- Exposure to potential eye and skin irritants through splashing and spilling when chemicals are poured is eliminated.
- Potential for back strain is reduced by limiting lifting of large chemical containers.
Environmentally friendly
- Accurate dilution prevents excess chemical discharge into the waste water system.
- Concentrating chemicals allows enormous reduction in packaging, minimizing additions to the solid waste stream.
|
| AccuDose units are available with 3 types of eductors: |
- Hydro's E-Gap eductors, which provide backflow protection through use of an elastomeric sleeve. (ASSE 1055B Approved)
- Hydro's patented HydroGap II™ air gap eductors, which use a one inch gap of air between the water source and the chemical inlet to provide backflow protection. (ASSE 1055B Approved.)
- Standard eductors with mechanical hose bibb vacuum breakers.
|
|
| One product dispensers |
| AirGap Eductor |
E-gap Eductor |
Std. Eductor |
1 GPM |
3.5 GPM |
Approx. Dilution Range
1 GPM Max*/Min |
Approx. Dilution Range
3.5 GPM Max*/Min |
| 3830AG-2 |
38301 |
3830-2 |
1 |
0 |
128:1/3:1 |
----------- |
| 3833AG-2 |
38331 |
3833-2 |
0 |
1 |
----------- |
350: 1/3.5:1 |
|
| Two product dispensers |
| AirGap Eductor |
E-gap Eductor |
Std. Eductor |
1 GPM |
3.5 GPM |
Approx. Dilution Range
1 GPM Max*/Min |
Approx. Dilution
Range
3.5 GPM Max*/Min |
| 3841AG-2 |
38411 |
3841-2 |
2 |
0 |
128:1/3:1 |
----------- |
| 3844AG-2 |
38441 |
3844-2 |
0 |
2 |
----------- |
350: 1/3.5:1 |
| 3846AG-2 |
38461 |
3846-2 |
1 |
1 |
128:1/3:1 |
350: 1/3.5:1 |
|
| Three product dispensers |
| AirGap Eductor |
E-gap Eductor |
Std. Eductor |
1 GPM |
3.5 GPM |
Approx. Dilution Range
1 GPM Max*/Min |
Approx. Dilution
Range
3.5 GPM Max*/Min |
| 3850AG-2 |
38501 |
3850-2 |
3 |
0 |
128:1/3:1 |
------ |
| 3853AG-2 |
38531 |
3853-2 |
0 |
3 |
----------- |
350:1/ 3.5:1
|
| 3856AG-2 |
38561 |
3856-2 |
1 |
2 |
128:1/3:1 |
350:1/ 3.5:1 |
| 3858AG-2 |
38581 |
3858-2 |
2 |
1 |
128:1/3:1 |
350:1/ 3.5:1 |
| * Leaner dilutions possible – Contact Customer Service for information. |
|
| Options and Accessories |
| Model |
Description |
| 103 |
Drip tray; catches spills, holds bottles while filling or not in use |
| 115 |
Chemical management rack; holds dispenser and concentrates, includes drip tray. Wall, table or cart mountable |
| 116 |
Concentrate holding shelf for additional wall-mounted storage |
| 117 |
Chemical management rack for single product, lockable |
| 119 |
Locking option for 115 chemical management rack |
| 144 |
Tap water outlet valve; gives access to water source at dispenser |
| 138 |
Inlet water hose, 1⁄2" x 6', black |
| 185 |
Inlet water hose, 1⁄2" x 8', black |
| 186 |
Inlet water hose, 1⁄2" x 10', black |
|
|
 |
|
| |
| AccuDose Information |
 |
|
|
| Printable Details Pages |
|
|
| Instruction Manuals |
|
 |
38301, 38331, 38411, 38441, 38461, 38501, 38531, 38561, 38581 |
|
3830AG-2, 3833AG-2, 3841AG-2, 3844AG-2, 3846AG-2, 3850AG-2, 3853AG-2, 3856AG-2, 3858AG-2 |
|
3830-2, 3833-2, 3833-2, 3841-2, 3844-2, 3846-2, 3850-2, 3853-2, 3856-2, 3858-2 |
|
| |
| Help |
|
|
|
| |
|
